Description:
In this guide, we will show you how to setup the tripwire IVS feature on a supported device
Prerequisites
- Supported device with tripwire feature
Step by Step Instructions
1. From the Main Menu click AI
2. Click Parameters > Smart Plan
3. Use the drop down box to select the Channel
4. Click the IVS icon to enable. (Click Apply)
5. Click Parameters > IVS
6. Use the drop-down box to select the Channel. Then click Add in the lower right side of the screen to Add an IVS rule
7. The created rule will appear in the list
8. Click the Pencil icon to draw the Tripwire rule
9. The Channel will fullscreen. Left click anywhere inside the video frame to begin drawing the Trip line, then use the mouse to draw the trip line. Right click to end drawing
10. The Tripwire menu will appear
11. Click the following icon to set the Trigger settings when the IVS Tripwire rule is engaged.
12. The Trigger menu will appear
13. Once all Tripwire settings have been configured, Click Apply in the lower right of the screen to save all changes
14. The created Tripwire is now programmed
War dieser Artikel hilfreich?
Das ist großartig!
Vielen Dank für das Feedback
Leider konnten wir nicht helfen
Vielen Dank für das Feedback
Feedback gesendet
Wir wissen Ihre Bemühungen zu schätzen und werden versuchen, den Artikel zu korrigieren