Description:
In this guide, we will show you how to setup the Intrusion IVS feature on a supported device
Prerequisites
- Supported device with Intrusion feature
Step by Step Instructions
1. From the Main Menu click AI
2. Click Smart Search > Smart Plan
3. Use the drop down box to select the Channel
4. Click the IVS icon to enable. (And click Apply)
5. Click Parameters > IVS
6. Use the drop-down box to select the Channel.
Then click Add in the lower right side of the screen to Add an IVS rule
7. The created rule will appear in the list
8. Use the dropdown box to change the Rule Type to "Intrusion"
9. Click the Pencil icon to draw the Intrusion rul
10. Left click anywhere inside the video frame to begin drawing the detection area for the Intrusion.
Right click to end drawing.
11. You can use the Intrusion menu that appears for additional rule settings:
12. Click the Setup icon to set the Trigger settings when the IVS Missing Object rule is engaged.
13. The Trigger menu will appear (Once the trigger rule settings have been created click Apply, then click Back to return to the previous menu)
14. Once all settings have been configured, Click Apply in the lower right of the screen to save all changes
15. The created Intrusion rule is now programmed
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article